Hi All

Model: Knagsted
Script: Knagsted
Ingame testing: Knagsted


Thankyou for downloading my John Deere 1590 V1.1 No Till seed drill for LS 2009. 
This is a No till seeder that requires no plowing or harrowing/ripped before you can seed, if you are driving the tractor attached to it.
The seeder is hirable, however if the seeder i hired, the field does need to be plowed or harrowed for the helper to work.
(I know this sounds a little strange but the alternative was no hirable seeder.)



Installation:
Place the JohnDeere_1590.zip file in the "C:\Documents and Settings\[user]\Documents\My Games\FarmingSimulator2009\mods" folder




USERGUIDE:

FUNCTION KEYS:
Attach seeder:					q
Lower/lift seeder:				n
Open close seedbox lid:				g
Fill seeder:					m
liquid fertilizer on/off			j
Drain planter on ground:			0 (number)
Left marker:					1 (keypad)
Transport markers:				2 (keypad)
Right marker:					3 (keypad)
Helper on/off(AI):				h


SUPPORTED SEED TYPES:
Rape, wheat and barley


FILLING THE SEEDER:
1: Attach the seeder and back it up close up (aprox. 1-2meter from seeder backside) to a trailer containing Rape, wheat or barley.
2: Stay in the tractor attached to the seeder and Press (Key M) to fill (100 liters pr. key hit).
3: If the M doesn't fill the seeder try moving the seeder a bit and try again. 
   Make sure the trailer contains Rape, wheat or barley.
4: The HUD will tell you when you are positioned correctly to fill.


SEEDING:
1: Drive to a field
2: Lower the planter (Key n)
3: Extend markers (Keypad 1 or 3)
4: Turn on/off liquid fertilizer (Key j)
5: Drive forward and plant
6: Refill the planter by trailer as described above when empty


HIRRING HELP:
1: The seeder is hirable / has autopilot on fields that has been plowed or harrowed first. If you don't want to seed yourself activate helper (Key H)
2: The helper stops when the seeder i empty or runs out of plowed or harrowed field.
3: Refill the seeder by trailer as described above when empty
4: The field that the hired help is seeding MUST be plowed or harrowed


CHANGING SEED TYPE IN THE SEEDER:
1: If you finish planting one crop and want to plant another while the seeder is not empty, 
   you must first drain the remaining seed from the planter (Key number 0)
2: Now Move the planter to a trailer holding the new crop and fill it as described above.



I hope you will enjou the Model :-)

Best Regards
Knagsted
