March, 2011

If you downloaded this mod from any site other than LS-UK then you downloaded a stolen mod and likely earned someone some money from my efforts by doing so...

Downloading this file does not give you the right of re-distribution, do not upload to other sites!

If you use these mods in a map you intend to upload - please give me a credit

If you don't like the colours and don't know how to reskin them - PM me

Paddock or Field Fencing Kit:

Kit contains a representation of a 5 strand wire and wooden post style fencing

Collisions are off be default - you can enable them in Giants Editor if required

Kit contains:

20m and 40m panels

2 x 6m gates in both open and closed positions

3 x 6m gates in closed, open left and open right

Corner posts with strainers

Mid post with strainer

Gate post with strainer
 

Copy the i3d and textures files to a folder within your map folder and add to map using Giants Editor as usual

the posts have been made with an extra 300mm or 1 foot on the bottom to allow for uneven ground

as all the parts are separate, changes and scaling can be used

start in a corner with a corner post, add a 20m or 40m panel, duplicate and continue adding panels until desired

if you need a smaller panel, delete star pickets and posts until desired length is achieved then scale the wire length to suit

depending on your run of fence a mid strainer post can be added if you wish every 100m - 120m or so

only one gate post is included, after placing it, duplicate it, move it 12m then flip it 180 deg for the other side if building a 12m wide gate

for a 6m gate do the above but move the duplicate 6m then add either a left, right or closed gate as required

going up or downhill each part can be adjusted in height and the wires rotated to match



(C) Sandgroper on LS-UK


